P100ss Portable Microbial Air Sampler

EMTEK’s NEW 316 Stainless Steel, P100ss Portable Microbial Air Sampler is intended for monitoring of your critical ISO 5 and ISO 7 Zones (e.g., Rooms, Isolators, LAF Hoods, BSC's, BFS Chambers, Filling Lines, etc.), either with direct placement of the P100ss or by using it to remotely operate EMTEK’s Remote Air Samplers (RAS) placed at key locations within those critical areas, through either flexible, or fixed rigid vacuum tubing. The P100ss has substantial chemical resistance with its’ 316SS componentry and will be minimally impacted by frequent cleaning with harsh cleaning agents commonly used in those critical zones.

P100ss – General Specifications

• Model/Part#: P100ss.001
• Mass Flow Controlled Sample Rates of 28.3 and 100 LPM w/Applicable Inlet Cover
• Battery Life: >10 hrs. @ 28.3 LPM & >6 hrs. @ 100 LPM / Full Charge in 2.5-3 hrs.
• Dimensions: LxWxH = 7 x 5.375 x 5.5 inches (17.8 x 13.7 x 14 cm) / Weight: 7.3 Lbs (3.3 kg)
• LCD View Screen w/Touch Screen Interface
• P100ss Enclosure – 316 Stainless Steel – Grained Finish
• Inlet Base, Media Stage, Inlet Cover, Handle (28.3 or 100 lpm) – 316SS/Polished/Electropolished
• Inlet Cover Gasket – Teflon
• HEPA Filtered Exhaust, 0.22 Micron (w/remote exhaust tubing option, P100.RMTEXH.KIT)
• LCD/Touchscreen Overlay – Polycarbonate
• Blue Silicone Rubber Feet
• Communication: IP67 USB & RJ45 Connectors
• IR Remote – 5 Channel (Up to 40’ / Line of Site)
• Test Media Stage w/Adjsutable height to accept 15-40ml Fill 90mm Test Plates

P100ss – Remote Sampling Simplified Connectivity

NEW Remote Sampler Connection Options include press in 0.500” Barb and 25mm Sanitary Connectors. Simply remove the inlet cover and media stage to access the vacuum connection port and press in the desired connector type. Remote sampling with applicable RAS can be performed up to 65’/20m from the P100 at 28.3 LPM and 12’/3.7m at 100 LPM.

RAS SAMPLER OPTIONS – General Specifications

• RAS Available in 316SS (”.SS.”), or Anodized 6061-T6 Aluminum (”.AA.”) with 28.3 or 100 LPM Sample Rates
• RAS Dimensions: 2.125” (5.4 cm) H x 4.325” (~11cm) OD / Weight: 316SS 6.25 Lbs (~2.8 kg) / ALUM 2.1 Lbs (~1kg)
• Sanitary Connector (316SS) 1.112” (2.8 cm) H x 0.994” OD (25mm) Sanitary Flange.
• Barbed Connector (316SS) 1.5” (3.8cm) L x 0.500” (~1.3 cm) OD, or 1.25” (~3.2cm) x 0.375” (~1cm) OD (for 28.3 LPM Only)
• Media Stage w/Adjsutable height to accept 15-40ml Fill 90mm Test Plates

The RAS can be employed for use with either the side or bottom vacuum port, and with either a sanitary or barbed connector.

P/N’s as follows: P100.RAS.AA.100.500, P100.RAS.AA.28.500, P100.RAS.SS.28.500, P100.RAS.SS.100.500, add .SNT instead of “.500” for a Sanitary Connector and either “B” or “S” for Bottom or Side for mounting location, e.g., P100.RAS.SS.100.SNTB. The P100ss inlet cover can be used on the RAS Remote Base to minimize cost (P100.RMT.BASE.ASM.SS.500 or P100.RMT.BASE.ASM.500).

P100ss - DATA/COMMUNICATION

• Ethernet Port: Unit Calibration, PC Communication, and Data Output to Optional Printer
• USB Port: Data Retrieval via USB Drive, or PC
• User Selectable Parameters: Sample Rate, Sample Time or Volume, Delay/Test/Hold, Time Base, Date Format, User ID, etc.
• Sample Run Memory (500 Runs) – Critical Sample Run Parameters Captured
• Sample Run Data Output to Printer, USB, or PC
• Data Control through System Admin/User ID Control (Part 11 Compliant)
• Site Description Entry/Maintenance/Capture
• PC CONTROL SOFTWARE - Offers Substantial Operative PC Control of a single, or multiple P100ss's via Ethernet connection to a
• Local Area Network (LAN). General Control: Start, Stop, Pause, Resume, Set/View: Date, Time, Sample Volume, Sample Time,
• Delay, Test, Hold, Site ID, Bldg/Room Data View/Output: On Screen, .csv File, print
• DATA OUTPUT SOFTWARE – Allows for direct connection to a P100ss allowing for data output as .CSV Files or an encrypted PDF Report

P100ss - PORTABLE MICROBIAL AIR SAMPLING PACKAGE

Standard Package Includes: (P/N: P100ss.PACK)

• P100ss Microbial Air Sampler (316SS Components)
• 316SS Inlet Cover w/Choice of 28.3 LPM, or 100 LPM
• IR Remote Control / 5 Channels (Start/Pause/Stop)
• Inlet Cover and Port & Plug Set (USB, RJ45, Inlet/Outlet Plug)
• Users’ Manual & Associated Documents (on 1 8GB USB Drive)
• AC/DC Power Supply/Charger
• NIST Traceable Calibration and Certificate
• Standard 2-Year Warranty
• IQ/OQ/PQ Validation Template
• Hard Transport Case w/Custom Foam Inserts